Indstillinger
Hurtig levering
Gratis levering
Incoterms
Betalingstyper
Markedspladsprodukt
Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Slide 32
Slide 33
Slide 34
Product List
Even in the event of a short circuit between the output of the IPS and the ground, the current will be limited without damaging the silicon. This is maybe the most important feature and differentiation with automotive IPS. If the current limit is too high, this can destroy the load and even burn the board. Typically, for a standard current of 0.7 A, the current limit will be slightly more than 1 A. In addition, for a standard current of 1 A, the current limit is roughly 1.5 A. An optimized current limit is also very important for good thermal management. Indeed, a high current will increase the temperature in the package and the thermal shut down will be reached faster.
PTM Published on: 2011-09-07
Danmark