Demonstration Circuit 1459B is an energy harvesting power supply featuring the LTC3588-1/LTC3588-2.
The LTC3588 integrates a low-loss full-wave bridge with a high efficiency buck converter to form a complete energy harvesting solution optimized for energy sources with high output impedance such as piezoelectric transducers.
An ultralow quiescent current undervoltage lockout mode with a wide hysteresis window allows charge to accumulate on an input capacitor until the buck converter can efficiently transfer a portion of the stored charge to the output.
Four output voltages are pin selectable with up to 100mA of continuous output current. A power good comparator produces a logic high referenced to VOUT on the PGOOD pin when the converter reaches the programmed VOUT, signaling that the output is in regulation.
| Manufacturer | Analog Devices Inc. |
|---|---|
| Category | Energy Harvesting |
| Sub-Category | Vibration Energy Harvesting |
| Eval Board Part Number | 505-DC1459B-A-ND |
| Eval Board Supplier | Analog Devices Inc. |
| Eval Board |
Normally In Stock
|
| Application / Target Market |
Energy Harvesting
RF: Wireless Sensor |
| Voltage Out |
1.8 V
2.5 V 3.3 V 3.6 V |
| Voltage In |
2.7 ~ 20 V
|
| Current Out |
100 mA
|
| Features |
Current Limit (Adj. or Fixed)
Power Good Output Under Voltage Protection, Brown-Out |
| Design Author |
Linear Technology
|
| Component Count + Extras |
6 + 12
|
| Main I.C. Base Part |
LTC3588-1
|
| Date Created By Author | 2010-04 |
| Date Added To Library | 2016-10 |
Indstillinger
Hurtig levering
Gratis levering
Incoterms
Betalingstyper
Markedspladsprodukt
