IAR Systems Software Inc

I-jet Debugging Probe

IAR Systems introduces the I-jet, an in-circuit debugging probe for ARM

Image of IAR Systems Software's I-jetIAR Systems's I-jet is a slim JTAG hardware debug probe. It connects via USB to the PC host running Windows. I-jet integrates seamlessly into IAR Embedded Workbench and is fully plug-and-play compatible.

I-jet is compatible with IAR Embedded Workbench for ARM version 6.30.8 or later.

Features
  • Supports ARM7/ARM9/ARM11 and Cortex-M/R/A cores
  • Seamless integration into IAR Embedded Workbench IDE
  • Fully plug-and-play compatible
  • Hi-speed USB 2.0 interface (480 Mbps)
  • No power supply required, powered entirely by the USB port
  • Target power of up to 400 mA can be supplied from I-jet with overload protection
  • Target power consumption can be measured with ~200 μA resolution at 200 kHz
  • JTAG and Serial Wire Debug (SWD) clocks up to 32 MHz
  • Serial Wire Viewer (SWV) with UART and Manchester encoding
  • Support for SWO speeds of up to 60 MHz
  • Embedded Trace Buffer (ETB) support
  • Download speed of up to 1 MByte/sec
  • Automatic core recognition
  • Support for multiple JTAG devices with automatic chain detection and graphical display
  • Direct download into flash memory of most popular microcontrollers
  • Support for JTAG adaptive clocking (RTCK)
  • Automatic JTAG/SWD detection
  • JTAG voltage measurement and monitoring
  • Supports target voltage range from 1.65 V to 5 V
  • Standard MIPI-20 and MIPI-10 JTAG cables are included
  • ARM-20 (0.1 in x 0.1 in) JTAG adapter is included

I-jet

BilledeManufacturer Part NumberBeskrivelseUdnyttet IC/delBemærkningTilgængeligt antal Pris
JTAG ARM DEBUGGING PROBEI-JETJTAG ARM DEBUGGING PROBEARM7®, ARM9®, ARM11®, Cortex®-132 - Immediate$5,594.10Vis detaljer
Published: 2012-08-02

Related Articles and Blogs

Select and Apply the Right Low-Power Microcontroller for the IoT The selection and application of a low-power MCU for the IoT requires careful consideration of architectures and the wise use of power monitoring tools.
Minimizing IoT Sensor Node Power Consumption Powering IoT sensors requires designers to optimize hardware and software, while also looking for ways to apply energy harvesting techniques.
Using MCU Power Management Options to Optimize System Efficiency When it comes to portable electronics, the length of operation on a single charge is very nearly as important as functionality.