Industrial
Key Components for Fabrication
- Welding
- Cutting
- 3D Printers
- Melting / Forging / Hardening
Welding
Resistors
Power Resistors for Mounting onto Heatsink, Thick Film Technology
- High power, high voltage, up to 850 W at 85 °C bottom case temperature
- Single element or two and three resistive elements in the same case
- Low inductance, wide ohmic range
Aluminum Capacitors
Aluminum Electrolytic Capacitors, Power, Ripple, Miniature, Snap-In
- 500 V range for use in PFC or countries with unstable mains voltage
- Useful life 5000 h at 85 °C translates to > 10 years 24/7 application life at 50 °C
Film Capacitors
THB DC-Link Metallized Polypropylene Film Capacitors, Radial Type, 85 °C / 85 % RH 1000 h at UNDC
- High robustness under high humidity: THB 85 °C / 85 % RH / 1000 h at rated voltage
- High ripple current capability, low ESR, low ESL
- Widest range of cases, voltages and capacitances
Panel Potentiometers
12.5 mm Modular Panel Potentiometer
- Up to 7 modules, conductive plastic or cermet technology, 50 k cycles
- High level of customization for mechanical and electrical features
- Shaft and panel sealed version
Optoelectronics
Phototransistor Optocouplers with Very High Isolation Voltage in Through-Hole and SMD
- VISO = 8200 VRMS, creepage ≥ 14 mm, VIORM = 1450 Vpeak, temperature -40 °C to 110 °C
- Reinforced Isolation Class I - III mains voltage ≤ 1000 V, Class I - IV ≤ 600 V
- Long term availability
Power ICs
4.5 V to 60 V Input, 2 A, 4 A, 6 A, 10 A, microBUCK® DC/DC Converters
- Wide input voltage high efficiency synchronous buck regulators with integrated high side and low side power MOSFETs
- Versatile, highly efficient, highly configurable, and robust and reliable
Power Rectifiers
Phase-Leg configuration in TO-247 package
- high power input rectifier up to 45A
- high surge current capabilty and up to 175°C
Power Rectifiers
Insulated Ultrafast Rectifier Module, 280 A
- Two separated Diodes in SOT-227
- High surge current capability, high case dielectric strength of 2500 VRMS
- 45ns recovery time- suitable for HF welders
Cutting
Optoelectronics
Optocoupler with Phototransistor Output and Low Forward Current of IF = 1 mA
- High current transfer ratio, high isolation voltage of 5000 VRMS
- Operating temperature range -55 °C to +110 °C in 4-pin LSOP, mini-flat package
- 80 V emitter voltage
Resistors
Power Resistor for Mounting onto Heatsink, Thick Film Technology
- High power, 57 mm x 57 mm, 800 W at 25 °C on heatsink, low weight 83 g
- Non-inductive down to 1 µH, high pulse capability up to 1000 J short pulse
- Wide ohmic range and high power density
Ceramic Capacitors
High Voltage C0G(NP0) and X7R, Voltage Up to 8 kV
- Excellent reliability with serial electrode design
- High voltage breakdown compared to standard design
- Large case sizes for creepage
Inductors
IHLP® Commercial Inductors, High Temperature (155 °C)
- Compact composite inductor for high efficiency DC/DC conversion
- Handles high transient current spikes without saturation
- Low emission of EMI
MOSFETs
E Series Power MOSFET
- Low figure-of-merit (FOM) RON x Qg
- Low input capacitance (Co(er))
- Zener protection of gate
Thermistors
Leadless NTC Thermistor Die Suitable for Wire Bonding
- Flat chip contacted top and bottom (gold: NTCC300E4, silver: NTCC200E4 series)
- Wide temperature range: -55 °C to +175 °C, Highly resistant to thermal shocks
- Resistance to leaching
Transformers
Miniaturized Gate Drive Planar Transformers
- Deliver MOSFET / IGBT gate power and timing signals simultaneously
- Lowest profile package for 1200 V busses, < 12 mm tall
- Fast signal rise time, minimal overshoot, and high peak current capabilities
Ceramic Capacitors
High Voltage Class 1 Ceramic AC and DC Disc Capacitors
- 10 kVDC to 50 kVDC> / 7 kVAC to 34 kVAC, screw terminal mounting
- Low dissipation factor of 0.2 % at 1 kHz, N4700 (T3M) class 1
- Negligible piezoelectric / electrorstrictive effect, low inductance
Power Rectifiers
Phase-Leg configuration in TO-247 package
- high power input rectifier up to 45A
- high surge current capabilty and up to 175°C
3D Printers
Optoelectronics
AC and DC Linear Optocoupler with VDE, UL, BSI, and FIMKO Certification
- Feedback photodiode compensates for LED's time and temperature characteristics
- Isolation test voltage, 5300 VRMS in a DIP or SMD package
Power ICs
3 V to 28 V Input, 8 A, 12 A microBUCK® DC/DC Converters
- Internal compensation, small solution, high efficiency up to 97 %
- Scalable solution 8 A and 12 A, adjustable output voltage down to 0.6 V
- Cycle-by-cycle current limit, OVP, UV, power good flag, over temperature protection
Thermistors
NTC Thermistors, Low Thermal Gradient Lug Sensors
- Low thermal gradient surface temperature sensor
- 1500 VAC insulation voltage
- Customization of wire harness possible
Optoelectronics
Subminiature Dual-Channel Transmissive Optical Sensor with Phototransistor Outputs
- Emitter wavelength 950 nm, released for high operating temperatures up to 125 °C
- Gap 3 mm, aperature 0.3 mm. SMD package
Inductors
Low Profile, High Current IHLP® Inductors
- Compact composite inductor for high efficiency DC/DC conversion
- High frequency operation out to 5 MHz, excellent saturation
- Low emission of EMI
Tantalum Capacitors
vPolyTan™ Polymer Tantalum Capacitors
- High-capacitance, low-ESR polymer tantalum capacitors
- Higher voltage handling capability requires less voltage derating
- Stable electrical performance over temperature and voltage
- Small case size, low profile
Power Metal Plate
Power Metal Plate Current Sense Resistors, Low Value (10 to 500 mΩ), SMD, High Power
- 2010 up to 3W at 70°C. 2512 up to 4W at 70°C
- Wide resistance range. No power derating at higher resistance
- Optimized for low drift and high load
Power ICs
4.5 V to 18 V Input, 20 A microBRICK® DC/DC Regulator Module
- Synchronous buck regulator module with integrated power MOSFETs and inductor
- Versatile, highly efficient, highly configurable, robust and reliable, high power density
- Smallest case size on the market
MOSFETs
Dual N-Channel 40 V (D-S) MOSFETs
- Integrated MOSFET half-bridge power stage
- Optimized Qgs/Qgs ratio improves switching characteristics
- Excellent layout routing possible
ICs
3.5 A, 78 mΩ, 2.8 V to 22 V eFuse With Accurate Current Limit, OVP, and Active Reverse Current Blocking
- 2.8 V to 22 V operation voltage
- 28 V max. DC tolerance on VIN
- 33 mΩ typical switch resistance
Melting / Forging / Hardening
Optoelectronics
Phototransistor Optocouplers with Very High Isolation Voltage in SMD
- Isolation test voltage up to 13.9 kV, rated recurring peak voltage VIORM of 1450 Vpeak
- Reinforced Isolation Class I - III mains voltage ≤ 1000 V, Class I - IV ≤ 600 V
- Long term availability
Aluminum Capacitors
Aluminum Capacitors, Power, High Ripple Current, Screw Terminals
- Long life screw-terminal, high ripple current
- Custom made; the perfect aluminum capacitors for your application
Optoelectronics
Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay
- Drive current from primary side LED; one less external power supply needed
- Isolation test voltage 4500 VRMS and integrated turn-off circuitry for high-speed switching
Resistors
Power Resistors for Mounting onto Heatsink, Thick Film Technology
- High power, high voltage, up to 850 W at 85 °C bottom case temperature
- Single element or two and three resistive elements in the same case
- Low inductance, wide ohmic range
Film Capacitors
Metallized Polypropylene Film Capacitor, Radial Snubber Type
- IGBT direct mount snubber
- High peak current capabilities for demanding power electronic applications
Resistors
Power Resistor for Mounting onto a Heatsink Thick Film Technology
- Non-inductive, wide resistance range
- high continous power dissipation of 1100W
- Dielectric Strength of 7 kVRMS or 12 kVRMS
Thermistors
Leadless NTC Thermistor Die Suitable for Wire Bonding
- Flat chip contacted top and bottom (gold: NTCC300E4, silver: NTCC200E4 series)
- Wide temperature range: -55 °C to +175 °C, Highly resistant to thermal shocks
- Resistance to leaching
Optoelectronics
UV SMD LED with Silicone Lens
- Ceramic based high power UV LED with silicone lens for long life time
- Radiant power (typ.): 690 mW at 500 mA, 945 mW at 700 mA

