DD21 Series Datasheet by SCHURTER Inc.

Raungs UL/CSA 1 min/50 Hz rature lPrPrutecllon shock Malena‘ Housmg 10A / QSDVAC: 50Hz TDA/TQSVAC OHZ {mm Side H340 am to IEC 60529 mass \ or H acc, to \Ec 51140 DEmm Muunnng screw :orque max 0 5 Nm Thermoplasn mac UL 94 “0‘ 10A. Prutechun C‘ass \ for {userhnks 5 x 20 mm Ema ves Techmca‘ Detaus
1
Power entry modules without line filter DD21
https://www.schurter.com /PG05
Connectors
IEC Appliance Inlet C14 with Line Switch 2-pole, Fuseholder 1- or 2-pole, for PCB mounting,
See below:
Approvals and Compliances
C14
70° C
Description
- Panel mount :
Screw-on mounting on PCB/Panel backside with screws M3
- 3 Functions :
Appliance Inlet Protection class I , Line Switch 2-pole , Fuseholder for
fuse-links 5 x 20 mm 1- or 2-pole
- V-Lock notch standard
- Meets the requirements of IEC 60335-1 for appliances in unattended
use. This includes the enhanced requirements of glow wire tests acc.
to IEC 60695-2-11 or -12 &-13.
- PCB terminals
- With cover on rear-side
Characteristics
- Ultra-compact design. Ideal for low profile designs
- All single elements are already wired
- For added safety "Extra-Safe" fuse drawers are available
- Ideal for application with high transient loads
- Suitable for use in equipment according to IEC/UL 62368-1
Other versions on request
- Fixing on PCB with self-tapping screws 3 mm or pre-inserted nuts M3
- Fuse drawer 1-pole, plus spare fuse case
- Fuse drawer 2-pole, with shorting bar
- Other rocker marking
- Line switch 1-pole
- Protection class II, 70°C
- Without cover
References
Alternative: version with line filter DD22
Alternative: version for panel mounting DD11
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 10 A / 125 VAC; 60 Hz
Dielectric Strength > 2.5 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Tempe-
rature
-25 °C to 85 °C
IP-Protection front side IP40 acc. to IEC 60529
Protection against electric
shock
Suitable for appliances with protection
class I or II acc. to IEC 61140
Terminal For PCB mounting 3 mm, Ground ter-
minal, additional quick connect 4.8 x
0.8 mm
Panel Thickness S Screw-on mounting: max 3 mm
Mounting screw torque max 0.5 Nm
Material: Housing Thermoplastic, black, UL 94V-0
Appliance inlet/-outlet C14 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I
Fuseholder 1-/2-pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
Rated Power Acceptance @
Ta 23 °C
5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per
pole
Power Acceptance @ Ta >
23°C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Line Switch Rocker switch 2-pole, non-illuminated
or illuminated, acc. to IEC 61058-1
Technical Details
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
EH @(éy if E L V-Lock El
2
Power entry modules without line filter
DD21 https://www.schurter.com /PG05
Connectors
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: DD21
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40046933
UL Approvals UL UL File Number: E93617
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements
Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles
Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 62368-1 IEC 62368-1 includes the basic requirements for safety of audio, video,
information technology and office equipment.
Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the
enhanced requirements of glow wire tests acc. to IEC 60695-2-11 or -12
& -13.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
White Paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use.
This includes the enhanced requirements of glow wire tests acc. to IEC
60695-2-11 or -12 &-13.
Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1
3
Power entry modules without line filter DD21
https://www.schurter.com /PG05
Connectors
Dimensions [mm]
Screw-on version
46.7
32.3
27.2
3.15
3.4
10.3
R 1.85
0.95 1.25
29.26 10.45
56
65
4.5 17
±0.10
27.1
2.5
34.6 3.5
2.5
1.5 33
0.8
19.05
28.1
56
47.1
±0.15
±0.10
R 2±0.05
3.6
1) 2)
46.6
32.4 3.2
±0.10
56
10.45
±0.15
3.6
524.4
4.59.5
3.4
39.65±0.15
6±0.10
3.6
1.6
1.3
1.3
+0.10
0
+0.10
0
9.55
+0.10
0
±0.10
1) with cover
2) without cover
For grounding additional quick connect terminal 4.8 x 0.8 mm
Diagrams
non-illuminated
F2
F1
L'
N'
PE'
PE''
L
N
PE
2)
1)
S
1) Line
2) Load
illuminated
F2
F1
L'
N'
PE'
L
N
PE
2)
1)
R
S
PE''
1) Line
2) Load
2.0 \ ELSCHIJRTER \
4
Power entry modules without line filter
DD21 https://www.schurter.com /PG05
Connectors
Derating Curves
1-pole
Admissible power acceptance in
Watt
020406080 100
I = << In
I = 0.7 In
I = 1.0 In
2.0
1.5
1.0
0.5
0.0
Ambient air temperature Ta °C
2-pole
Admissible power acceptance in
Watt per pole
020406080 100
0.2
0.0
I = << In
I = 0.7 In
I = 1.0 In
1.6
0.6
0.4
0.8
1.2
1.0
1.4
Ambient air temperature Ta °C
All Variants
Fuseholder Line Switch Illumination Color Cover Order Number
1-pole 2-pole non-illuminated - lDD21.0111.1111 █
1-pole 2-pole illuminated red lDD21.0113.1111
1-pole 2-pole illuminated green lDD21.0114.1111
2-pole 2-pole non-illuminated - DD21.0121.1110 █
2-pole 2-pole non-illuminated - lDD21.0121.1111 █
2-pole 2-pole illuminated red lDD21.0123.1111
2-pole 2-pole illuminated green lDD21.0124.1111 █
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
The fuse drawer is not included and must be ordered separately (see required accessory).
Packaging unit 40 Pcs
Required Accessory
Description
Fusedrawer 2
Fusedrawer for Fuse Links 5x20 mm, with or without Voltage Selector Insert
Fingergrip, 2-pole 4301.1401
Extra-Safe, 2-pole 4301.1403
Fingergrip, 1-pole 4301.1405
Extra-Safe, 1-pole 4301.1407
...
5
Power entry modules without line filter DD21
https://www.schurter.com /PG05
Connectors
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
4787, Mounting: Screw-on mounting, Appliance Outlet: IEC Solder terminals, 10 A, Suitable for appliances with pro-
tection class I 4787
4788, Mounting: Snap-in version, Appliance Outlet: IEC Solder / Quick Connect, 10 A, Suitable for appliances with
protection class I 4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06
4781 Mounting: Power Cord, Cable, Connector: IEC C15 4781
4784 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C15 4784
...
Mating Outlets/Connectors shuttered
Connector Overview complete
4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4783
Power Cord Overview complete
VAC13KS, Overview, V-Lock cord retaining, diverse Connector IEC C13, diverse, black VAC13KS
VAC17KS, V-Lock cord retaining, diverse m, Connector IEC C17, diverse, black / grey / white VAC17KS
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
19.04.2021