Your item(s) 
Selected Filters
|
Supplier: TDK InvenSense
Subtitle:
Integrated Single Axis Digital-Output Gyroscope
Description:
The ISZ-2510 is a single-chip, digital-output, 1-axis MEMS gyro IC with programmable full-scale ranges of ±250, ±500, ±1000, and ±2000 degrees/sec (dps), which is useful for precision tracking of both fast and slow motions. Factory-calibrated initial sensitivity reduces production-line calibratio...
Category: Sensors - Inertia - Gyroscopes |
|
Supplier: TDK InvenSense
Subtitle:
High Performance 3-Axis MEMS Gyroscope in 3x3mm Package
Description:
The ITG-1010 is a 3-axis MotionTracking device that includes a 3-axis gyroscope in a small 3mm x 3mm x 0.9mm (16-pin QFN) package. ITG-1010 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating vol...
Category: Sensors - Inertia - Gyroscopes |
|
Supplier: TDK InvenSense
Subtitle:
Integrated Triple-Axis Digital-Output Gyroscope
Description:
The ITG-3400 is a single-chip, digital-output, 3-axis MEMS gyro IC with programmable full-scale ranges of ±250, ±500, ±1000, and ±2000 degrees/sec (dps), which is useful for precision tracking of both fast and slow motions. Factory-calibrated initial sensitivity reduces production-line calibratio...
Category: Sensors - Inertia - Gyroscopes |
|
Supplier: TDK InvenSense
Subtitle:
Triple-Axis Gyroscope For High Speed Motion and Wearables
Description:
The ITG-3701 is a single-chip, digital output, 3 Axis MEMS gyroscope IC which features a 512-byte FIFO. The FIFO can lower the traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode. The gyrosc...
Category: Sensors - Inertia - Gyroscopes |
|
|
Supplier: TDK InvenSense
Subtitle:
Triple Axis (X/Y/Z) MEMS Gyroscopes
Description:
InvenSense three-axis gyroscope family of parts is the world’s first single-chip, digital-output, 3-axis MEMS devices. Various members of the three-axis gyroscope family are optimized for consumer, and industrial applications. All devices feature three 16-bit analog-to-digital converters (ADCs) f...
Category: Sensors - Inertia - Gyroscopes |
|
Supplier: TDK InvenSense
Subtitle:
Wide-Range 6-Axis MEMS MotionTracking™ Device for Sports and High Impact Applications
Description:
The ICM-20601 SoC offers the smallest size, lowest profile and lowest power in conjunction with industry leading high FSR. With an extended FSR range of ±4000 dps for gyroscope and ±32g for accelerometer, the ICM-20601 enables precise analysis of contact sports applications providing continuous m...
Category: Sensors - Inertia - IMU (Inertial Measurement Units) |
|
Supplier: TDK InvenSense
Subtitle:
High Performance 6-Axis MEMS MotionTracking™ Device
Description:
The ICM-20602 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 3mm x 3mm x 0.75mm (16-pin LGA) package. ICM-20602 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device...
Category: Sensors - Inertia - IMU (Inertial Measurement Units) |
|
Supplier: TDK InvenSense
Subtitle:
6-Axis MotionTracking Device
Description:
The ICM-20608 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 3mm x 3mm x 0.75mm (16-pin LGA) package. It also features a 512-byte FIFO that can lower the traffic on the serial bus interface, and reduce power consumption by allowing the sy...
Category: Sensors - Inertia - IMU (Inertial Measurement Units) |
|
Supplier: TDK InvenSense
Subtitle:
6-Axis MEMS MotionTracking™ Device with Enhanced EIS Support
Description:
The ICM-20648 a 6-axis MotionTracking device that is ideally suited for Smartphones, Tablets, Wearable Sensors, and IoT applications. ICM-20648 supports an auxiliary I²C interface to external sensors, on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programma...
Category: Sensors - Inertia - IMU (Inertial Measurement Units) |
|
Supplier: TDK InvenSense
Subtitle:
6-Axis MotionTracking Device with 3-Axis Gyroscope and 3-Axis Accelerometer
Description:
The ICM-20689 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 4x4x0.9mm (24-pin QFN) package. ICM-20689 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features...
Category: Sensors - Inertia - IMU (Inertial Measurement Units) |
