Search / Ordering
The TDA5051A lighting control demo consists of a master controller and a slave lighting controller.
How to select the correct capacitors for the external circuitry of modular voltage regulators and what can go wrong if a poor choice is made.
Batteries provide power to many different applications, and wireless charging enables those applications where it is difficult or impossible to use a connector.
Demonstration circuit 2313A showcases the LTC2937, a programmable, six-channel power supply sequencer and voltage supervisor.
TRIAC dimmers are designed for resistive loads such as incandescent or halogen lights and have a significant installed base in the United States and worldwide.
Wireless power-charging coils (WE-WPCC) are easy to mount and save space. They have low DC resistance, high Q, and are Qi-compliant up to 15 W.
This article explains what an LED is and how to optimize LED performance through the correct choice of a driver and power supply.
The MIC94300 is an integrated load switch that incorporates Micrel’s Ripple Blocker™ active filter technology.
Wireless power enables applications where it is difficult or impossible to use a connector to deliver power.
The bq24210/2 series of devices are highly integrated, Li-ion, linear charging devices targeted at space-limited portable applications.
Current sensors are either open- or closed-loop. Open-loop current sensors measure AC and DC currents and provide electrical isolation between the circuit being measured and the output of the sensor.
Terms & Conditions
Freephone: 80 88 13 67Toll: +31 53 484 9584Fax: +31 53 484 9583
Copyright © 1995-2017, Digi-Key Electronics.All Rights Reserved.701 Brooks Avenue South,Thief River Falls, MN 56701 USA